4
KIT CONTENTS
The Alarm System should contain the following devices.
1xSolar Siren
1xDummy Siren
1xControl Panel
2xPIR Movement Detectors
2xMagnetic Door/Window Detectors
Also included:
Power Supply Adaptor
RJ11-BT Telephone Connection Lead
Siren and Dummy Siren Mounting Template
Installation & Operating Manual
Installation DVD
Fixing Pack
Batteries
PLEASE READ BEFORE YOU INSTALL
The Solar Siren is supplied complete with a rechargeable 6V battery. However, before
installing this system, please ensure the battery is still fit for use by checking the date code
label on it. Remove the battery cover on the rear of the Siren, you will see the label shown
here. (Example of a date is
02/2009 meaning February 2009) MM = Month, YYYY = Year.
If the date you purchased this kit exceeds the install date but not the expiry date marked on this label, you will need to recharge
the battery. You can use the Control Panel supplied with this kit to recharge this battery for 24 hours before you install the
system. (See CONTROL PANEL section), but you will need to remove one of the supplied Control Panel batteries first.
If the battery has expired seek a replacement.
PIR Movement
Detector
Control Panel
Solar Siren / Dummy Siren
Door/Window
Detector
6V/1.2Ahr Sealed lead acid battery
(supplied 1 x fitted in Siren
and 2 x fitted in Control Panel)
3V CR2032 Lithium
Coin Cell (for Door/
Window Detectors)
9V PP3 Alkaline battery
(for Siren and
PIR Detectors)
1.5V C Alkaline
batteries (for
Dummy Siren)
Install battery before
MM/YYYY
or
else recharge after.
Battery expiry date
MM/YYYY
(Do not recharge after expiry date).
HEALTH WARNING:
Do not put the coin cell
battery in your mouth as
this could impair your
health. Keep this cell out
of reach from young
children as they could
swallow it and choke.
Kommentare zu diesen Handbüchern