Response SL5 Bedienerhandbuch Seite 43

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 64
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 42
43
Press to save new setting and exit, or
Press to exit without saving.
VOICE DIALLER
The parameters in this menu allow the setting of
the systems Voice Dialler. It allows up to 4 phone
numbers to be entered and called in sequence.
The alarm voice messages are also recorded here.
Refer to Voice Dialler Setup diagram on page 44.
Scroll through the programming menu until ‘5. VOICE
DIALER SETUP’ is displayed and press .
Note: After completing the Voice Dialler Setup press
to return to the top level programming menu.
PHONE NUMBERS
Scroll through the menu until ‘5-1 PHONE NUMBERS’
is displayed and press .
Scroll through the menu until the required ‘Phone
No._’ (and the current setting) is displayed.
To change the setting press .
Enter the new phone number (32 digits max.)
Press to save and exit, or
Press to exit without saving.
After programming all required phone numbers press
to return to the top level Voice Dialler menu.
RECORD ALARM MESSAGES
Scroll through the menu until ‘5.2 RECORD ALARM
MESSAGES’ is displayed and press .
Scroll through the available menu options until the
required message to be recorded is displayed.
a) Main message (12 seconds max.).
b) Intruder Alarm message (5 seconds max.).
c) Fire Alarm message (5 seconds max.).
d) Panic/PA Alarm message (5 seconds max.).
e) Duress alarm message (5 seconds max.).
To change the setting press .
Press to start the voice recorder.
Press to exit without saving
Press to return to the top level Voice Dialler
Setup menu.
REPLAY ALARM MESSAGES
Scroll through the menu until ‘5.2 RECORD ALARM
MESSAGES’ is displayed and press .
Scroll through the menu options until the required
message is displayed and press to replay the
message.
Press to return to the top level Voice Dialler
menu.
ENTER
ESC
ENTER
ENTER
ENTER
ENTER
Notes:
Press to insert a 3.5 seconds pause in
the dialling sequence.
Press to move the cursor left.
ENTER
ESC
ESC
1
After recording, press to stop the
recorder and cancel any remaining recording
time. The new message will then be replayed.
ESC
3
ESC
ESC
ENTER
ENTER
Note: For the Voice Dialler to operate correctly
the ‘Dialler Mode’ (see system setup) must be
correctly set and programmed.
Ensure all Alarm Messages are recorded (see
Record Alarm Messages, right).
Notes:
To enter code B, press ,
To enter code C, press ,
To enter code D, press ,
To enter code E, press ,
To enter code F, press ,
1
2
3
4
5
ENTER
ESC
Press to move the cursor right.
Press to delete the number under
the cursor.
Press (and hold) to erase the entire
number.
Seitenansicht 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare