Response SL5 Bedienerhandbuch PDF herunterladen (Seite 53)

VOICE DIALLER

If an alarm is triggered and the Voice dialler is

activated then the first enabled phone number in the

dialling sequence will be called and the recorded

alarm message will be played. The recipient should

acknowledge the message by pressing the

button on their telephone keypad to shut down the

call sequence. If an acknowledgment signal is not

received, then the next enabled number in the call

sequence will be called. The dialler will continue

calling each enabled number in turn until either all

numbers in the sequence have been dialled or is

cancelled by an acknowledged signal from a recipient.

If an alarm occurs and the Voice Dialler is enabled…

1. The dialler will only activate after the fixed 30s

dialler delay has expired provided the system

has not been disarmed in that period.

2. Each entered phone number will be called in the

order 1 - 2 - 3 - 4

If a number is not entered it will not be dialled.

3. 10s after the number is dialled the appropriate

alarm message will be replayed followed

immediately by the main message.

The alarm and main messages will be repeated

continuously for 60s. After 60s has elapsed the

current message play cycle will be completed and

then the call will be terminated. This ensures the

message is not cut off part way through.

4. 10s delay before next entered number is dialled.

5. After all entered numbers have been dialled

once. There will be a 30s delay before the next

call sequence is started again from the first

entered number.

If a further zone 1 alarm event occurs after

more than 10 minutes then this event will be

transmitted to the AMS.

Remote Manager Diagram

System

Armed

0m 5m 10m 15m

Zn 1

Alarm

event

Zn 1

Alarm

event

Zn 2

Alarm

event

Zn 1

Alarm

event

Initial Zone 1

event...

Zone 1 alarm

event sent

to AMS

2nd Zone 1

event...

occurs within

10 minutes

of last Zn 1

event...

communication

to AMS

Initial Zone 2

event...

Zone 2 alarm

event sent

to AMS

3rd Zone 1

event...

occurs within

10 minutes

of last Zn 1

event...

AMS

Zone 1 alarm

AMS

Zone 2 alarm

AMS

Zone 1 alarm

Message replay

starts

Message play

time expires

10s

60s Message Play Time

Dialler delay

expires number

called

Message replay

complete

Call ended and

line hung up

30s Dialler

Delay

Alarm

Activated

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare

Response SL5 Bedienerhandbuch Seite 53

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Response SL5